The use of microfilters enables the cleanup of solutions through the removal of particles.
Microfiltration is most commonly used to prepare solutions for some analytical methods, particularly HPLC and GC. Solutions are passed through a fine filter mesh which traps any particles above a specified particle size.
A selection of different types of syringe filters.
More information on the different types of syringes can be found on the pages covering the drawing up of liquids using syringes and needles:
There are many different types of syringe filters available. Filters have varying solvent compatibility (eg hydrophobic and hydrophilic filter versions) as well as varying particle sizes.
Syringe filters are normally used to filter small volumes of solutions, typically 1 - 5 mL. To carry out a syringe filtration, you will require:
The solution to be filtered in an appropriate container from which the solution can be drawn into a syringe (eg a sample vial or small beaker)
Syringe of appropriate size (most commonly 1 mL)
The required syringe filter which is suitable for the solvent being used and the particle size required
Collection vessel for the filtrate (often a HPLC/GC vial)
Insert the syringe into the solution to be drawn up, and pull back the plunger to draw liquid into the syringe
Attach the desired syringe filter onto the syringe:
Luer lock syringes will connect by screwing the filter onto the Luer lock
Luer slip syringes will connect by pushing the filter firmly onto the Luer slip of the syringe
Note that filters are usually directional, and you should ensure that the syringe is connected to the correct side of the filter.
A filter being connected to a Luer lock syringe.
A filter being connected to a Luer slip syringe
The exit from filter should be placed into the collection vessel (usually a HPLC or GC vial)
Gently expel the liquid from the syringe through the filter. Care should be taken to avoid overpressurising the solution into the syringe filter. The filtration is more effective when carried out slowly.
For Luer slip syringes, the filter should be held securely onto the syringe whilst injecting the liquid to ensure that the filter and syringe do not become detached.
A solution being filtered from a Luer lock syringe.
A solution being filtered from a Luer slip syringe.
The syringe and filter should be disposed of appropriately.
For the Chemistry Teaching Labs the syringe and filter can be disposed together into a sharps bin.