Syringe filters are normally used to filter small volumes of solutions, typically 1 - 5 mL.
There are many different types of syringe filters available. Filters have varying solvent compatibility (eg hydrophobic and hydrophilic filter versions) as well as varying particle sizes.
The below information relates to the types of syringe filters avalialbe in the Chemistry Teaching Labs at York (as of 2026). These are those that are purchased from Chromatogrpahy Direct but this information may vary by supllier, so manufacturer guidance shoudl always be followed.
Hydrophilic surface, good solvent resistance and medium protein binding
Suitable for filtration of aqueous and most organic solvents
Excellent chemical stability and flexibility
Can be sterilised up to 121˚C
Normal pH range 3-14
Filter colour: White
Filter colour: Pastel green
Broad chemical and thermal compatibility
Filtration of liquid and gases
Normal pH 1-14
Filter colour: Orange
Filter colour: Purple
Broad chemical resistance
Excellent particle retention
Normal pH 1-14
Filter colour: Pink
Filter colour: Bright gold
Hydrophilic
High solvent resistance
Lower protein binding
Filtration of all aqueous and most solvent based samples
General filtration of biological samples, solvents, deionised water and reducing biological load
Filter colour: Sky blue
Filter colour: Racing green
Hydrophilic membranes
Low protein binding and low in extractables
Ideal for removing small particles, bacteria, viruses and fungi from aqueous based phase
High flow rate and high throughput
Normal pH range 3-12
Filter colour: Royal Blue
Filter colour: Yellow
High mechanical and tensile strength
Low protein binding
Wide range of chemical and temperature resistance
Normal pH 2-13
Filter colour: Red
Filter colour: Black
Wide range of chemical and temperature resistance
Low protein binding
Normal pH 2-13
Filter colour: Grey
Filter colour: Brown
Low protein binding; suitable for use with aqueous protein solutions
Nitrate free; suitable for groundwater filtration
Uniform pore size
Filter colour: Polar white
Filter colour: Lime green
Easy wettable
Resistant to most solvents and aqueous samples
Low non-specific of adsorption
Particle removal from solvents
Mobile phase filtration for HPLC
Normal ph 3-12
Filter colour: Orange rock
Filter colour: Mexico red
Improved hydrophilic character and very low protein binding
Improved aqueous sample flow and molecular weight cut off
Lower chemical resistance
Ideal for aqueous based samples, tissue culture and sensitive biological samples
Filter colour: Crystal blue
Filter colour: Lemon yellow
Borosilicate glass fibre
Broad chemical compatibility
Use alone or in series with another Chromatography Direct filters
Suitable for high throughput pre-filtration of viscous and particulate-laden samples
Removes particulates that interfere with UV/VIS spectrophotometric analysis
Filter colour: Pearl white
Filter colour: Mint green
The above information was sourced from Chromatography Direct on 2026-11-21 and is avaialble here
More information on the different types of syringes can be found on the pages covering the drawing up of liquids using syringes and needles: